Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 32 / 131

USER MANUAL – rev.2016/12 AGS 2500/3000 EN-HP
page
22
WARNING: Use protective equipment when handling crop protection
liquids!
The cover consists of one part with lever, through which the float valve mechanism for
ensuring aeration and prevention of water leaking from the tank on the bottom side. The cover
is opened by turning in clockwise direction and closed in reverse order (see marking on the
cover). Tank cover must be closed while working. We recommend using clean water for
filling.
When filling the tank, never insert the hose through cover into the tank or allow contact
between crop protection liquid and filling hose, as pollution of supply part of the hose may
arise. Due to pressure drop, crop protection liquid can flow back to filling hose.
WARNING: Never insert the hose through the cover in the tank or
allow contact of crop protection liquid with the hose, as it may
contaminate it! This can cause pressure drop and suction of crop
protection liquid in the hose!
7.4 Rinsing tank
Intended for washing the tank and other elements after you have finished working or after a
break. Fill the tank only with clean water. You can find more detailed instructions in the
chapter
“ DESCRIPTION OF VALVE SETTINGS FOR SPRAYING OR CLEANING”.
7.5 Tank for washing hands
Intended for washing hands after handling spray. Fill the tank only with municipal water.
Tank volume is 15 l.
WARNING: Water is not drinkable!
7.6 External filling of tanks
For easier and more convenient filling of tanks with water, the sprayer is equipped with a
special bayonet connection, which enable safe and clean filling. You can fill the main tank
and rinsing tank. Filling of the main tank is additionally protected with a non-return valve (A),
which prevents discharge of crop protection liquid from the tank.
Figure 6: TANK COVER