Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 27 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
17
5
CONNECTING SPRAYER TO TRACTOR
Sprayers AGS 2500EN-HP and AGS 3000EN-HP are constructed for connection to tractor’s
lower connection
(towing eyes

40mm (6) are replaceable). Fixed drawbar is length and
height adjustable, so the
sprayer
can be connected on different tractors. Do this (figure 3) by
unscrewing bolts (5) and nuts (3) and set the connection (1) on a new combination of holes on
sprayer
chassis. Then tighten all bolts and nuts (tightening torque: see chapter 13.3). Height of
connection must be such that the lower edge of
sprayer
chassis is horizontal, when the
sprayer
is connected to the tractor and it is positioned on a flat surface.
Replace the towing eye (6) by unscrewing bolts (7) and replace the towing hook with a new
one. Then put the bolts back and tighten them. Scale of bolts of towing eye is 100x110 mm.
Figure 3: CONNECTIONS
Legend:
1. Fixed drawbar
2. Hydraulic drawbar
3. Nut
4. Washer
5. Bolt
6. Towing eye
7. Bolt
8. Washer
WARNING: When opening the spraying equipment and driving downhill, there is
a problem of lifting the front end of the
sprayer
.