Agromehanika AGS 2500 EN-HP, Инструкция по эксплуатации

Страница: 13 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
3
2.5 Safety in handling with chemical products
Handle chemical products extremely carefully, to avoid potential
injuries and dangers to health, as well as to the environment:

Be very careful, when handling chemical products. Ensure
that you do not have direct contact with chemical products.
Handle chemical products as you would poisons.

Choose chemical products, which are least dangerous to
your health, most effective and easy soluble.

Always read instructions for use, given on the chemical
products. Regard regulations, safety measures and use
instructions.

When working, use respiratory protection, such as gas
mask, helmet with fresh air.

When preparing chemical products, wear appropriate
clothing. When working, use protection mask, gloves, boots
and protection clothing. Be careful with your protection
equipment. Do not use "worn-out" protection.

Make sure that your protection equipment and clothing is in
good condition. Dirty gas mask can cause skin irritation.
Change the filter regularly!

Choose "safer" chemical products. When choosing chemical
products, use products that are less irritant to the skin and
do not cause dust.

When choosing chemical products, prefer products,
which have "safer" packaging;

Prepare chemical products in the fresh air. When preparing products, turn off the
machine to reduce the risk of spilling chemical products.

Prepare chemical products in a wind-free environment or a calm location.

Make sure that the machine is regularly cleaned, to reduce the possibility of direct
contact with chemicals.

During preparation and mixing of chemical products, use tools, intended for this
purposes, litre scale, measuring tools, funnel, bucket. Regularly clean tools.

Do not prepare more chemical products than needed.

Make sure that your working day of using chemical products does not exceed eight
hours. Avoid stress and great physical strains.

Before sprinkling and eight hours after sprinkling do not drink alcohol.

During work with chemical products, do not eat, drink or smoke.

Do not try to free clogged nozzles by blowing with mouth.

In the sprinkling period, heed to spray waiting period.

In case of contact of chemical products with eyes, immediately rinse them with clean
water.

After sprinkling, wash your hands and face well before ingesting food and liquids.

Disable children and animals to access the machine, until it is properly cleaned.

After use, clean the machine properly and store it in a suitable place, so that
unauthorized persons do not have access.

After working with chemical products take a thorough bath.

Clean and wash the machine after each use and before each maintenance procedure.
 If you have any health issues while dealing with chemical products, consult your
physician and try to contact the dealer of the chemical product.