Agromehanika AG-TRONIK S1, Инструкция по эксплуатации, Страница: 8 / 50

AG-TRONIK
8
2 PREDSTAVITEV AG-TRONIK-a S1
•
AG-TRONIK is processor-controlled device for monitoring and automatic balancing of spray on
machines for chemical protection of plants.
•
It is used on combination with pressure regulator PR10EC.
•
Take a few moments to familiarize yourself with component parts of AG-TRONIK.
•
In picture below, zones for monitoring and managing of AG-TRONIK are introduced (Figure 1).
Figure 1
•
The areas for managing and monitoring the regulation of spraying are described in table below
(Table 1).
IME OPIS FUNKCIJE
1 ON/OFF DIODE Informs whether the AG-TRONIK is ON.
2 TOUCH SCREEN It enables communication with the device.
3 UP/DOWN It enables to adjust the pressure in the system.
4 AUTOMATIC MODE Turn ON/OFF automatic mode.
5 MAIN VALVE Open / close the main (MAIN) valve.
6 BACK Exit from sub-window
7 OK Confirm the entered parameters.
8 SECTIONS Open / close boom section.
Table 1
2
8
5
6
4
3
1
7