Agromehanika AG-TRONIK S1, Инструкция по эксплуатации

Страница: 15 / 50

AG-TRONIK
15
4.2. Setup fields
•
The setup fields are used to enter the spray parameters (Figure 8).
• By pressing the setup fields, the field function is executed, or the new sub window opens where
we can enter the parameters.
Figure 8
•
In the table below, the function of each setup field is described (Table 4).
NAME DESCRIPTION
1
HECTARE DOSE Specifies the desired hectare consumption.
2
SPEED CONSTANT
CORRECTION
It is used for speed constant correction when using
the wheel speed sensor (optional equipment).
3
GPS GPS connection settings.
4
GENERAL SETTINGS Setup of date, time, language, luminance, simulation.
5
WORK Work allows you to save spraying settings.
6
SERVICE Service settings are accessible only to authorized
persons.
7
LIGHTS Turn on / off the lights for night spraying.
8
SECTION VALVES Turning ON / OFF section valves.
Table 4
1
2
3
4
7
5
6
8