Agrint ARIETE, Оригинальные инструкции по использованию и обслуживанию

Страница: 16 / 27

16
5.
C
OUNTER-KNIFE REGULATION AND REVERSING
a) In order to regulate the counter-knife, please read the following instructions:
1. Unscrew the lock nuts number “2”.
2. Use your hand to roll the rotor until the “CT” knife moves closer to the “CC” counter-knife.
3. Loosen the counternuts number “3” and regulate the space between the knife and the counter-knife
by tightening the screws number “1”. The right distance between the knife and the counter-knife is
between 1.6 mm and 3.2 mm.
4. Make sure that the correct distance is respected for all the four knives.
5. Tighten the counternuts and the two lock nuts number “2”.
b) In order to reverse the counter-knife, please read the following instructions:
1. Unscrew the three bolts “4” on the support “5”.
2. Unscrew the six screws “6”.
3. Remove the “TR” hopper from the machine.
4. Unscrew the two lock nuts “2” blocking the
“CC” counter-knife.
5. Reverse the “CC” counter-knife by 180°
keeping the superior surface of the counter-
knife unchanged.
6. Regulate the counter-knife by following the
procedure from step 2 to step 5.
7. Put the “TR” hopper back.
8. Tighten the screws number “6” and “4”.