AgriMetal BWSP-180 Скачать руководство пользователя страница 10

Страница: 10 / 47

EMPLOYEES SIGNATURE EMPLOYERS SIGNATURE

SIGN-OFF FORM

DATE

2.14 SIGN-OFF FORM

AgriMetal follows the general Safety Standards specified by the American Society of Agricultural Engineers

(ASAE) and the Occupational Safety and Health Administration (OSHA). Anyone who will be operating

and/or maintaining the Self-Propelled Blower must read and clearly understand ALL Safety, Operating and

Maintenance information presented in this manual.

Do not operate or allow anyone else to operate this equipment until such information has been reviewed.

Annually review this information before the season start-up.

Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your equipment. We

feel that an untrained operator is unqualified to operate this machine.

A sign-off sheet is provided for your record keeping to show that all personnel who will be working with the

equipment have read and understand the information in the Operator’s Manual and have been instructed in

the operation of the equipment.

Содержание BWSP-180
















































Результаты поиска

Содержание BWSP-180

Отзывы:

Похожие инструкции для BWSP-180

Бренды по названию

Популярные бренды

AgriMetal BWSP-180, Руководство оператора

Результаты поиска

Содержание BWSP-180

Отзывы:

Похожие инструкции для BWSP-180

Бренды по названию

Популярные бренды