13
SPECIFICATIONS
1. It's a good idea to perform the following storage procedures at the end of the season or if your
WEEDER won't be used for more than thirty days:
2. Remove all fuel from the fuel tank to prevent gum deposits from forming and causing possible
malfunction of the engine. Drain fuel into an approved fuel container.
3. Start and run engine until it stops due to lack of gasoline.
4. Clean unit thoroughly, removing all dirt and debris from the engine, tines and gear case.
5. Remove tines and oil tine shaft Reinstall tines. (Refer to p. 5 for procedures).
6. Remove clevis pin and snap pin, then turn stabilizer bar 180 degrees for storage. Remove
handle lock bolt. Carefully fold handles downward into storage position. Reinstall handle lock
bolt (Refer to P. 4 for procedures). NOTE: To give you more space in your garage or shed, the
WEEDER can be hung on a wall from the top of its rectangular tubing.
7. Store your WEEDER in a protected area for additional protection. CAUTION: Do not store your
WEEDER or battery charger where temperatures could get below 25 degrees F (-32 degrees C)
or above 125 degrees F (52 degrees C).
Displacement
1.4 kw / 7500 RPM (42.7cc)
Starter System
recail starter ( easy starter)
Ignition System
CDI
Carburetion System
Diaphragm
Clutch System
Centrifugal
Drive System
Worm Gear (40:1 reduction)
Tine Width
Adjustable 75-100mm
Tine Diameter
314mm
Cultivating Depth
94mm
Dry Weight
18.0 kg
Fuel Tank Capacity
900 cc
Dimension of the machine
155*84*76cm
Dimension of package
box:113*26*54cm
Air Cleaner
Oiled Foam Elements (2)
Handle
2-piece folding
Stabilizer Bar
Standard
Carrying Handle
Standard
