Agrilight AGRILED pro 16, Руководство пользователя и по сборке

Страница: 7 / 16

7
4 Precautions and Safety Instructions
General precautions
• Read first the safety precautions before installing or usin
the product!
• The manufacturer attaches great importance to the product
being used and maintained in a manner that guarantees
the safety of the users. To guarantee safe and reliable use,
please proceed as follows:
1. Read the manual and the safety instructions prior to
installing the product.
2. Ensure that all individuals involved in the installation and
commissioning are familiar with all relevant information from
the manual and safety instructions prior to installing and
commissioning of the product. Please ensure that those
instructions are actually understood. The person in charge
of installation is responsible for this.
• Always observe the safety instructions. If the safety
instructions, warnings and instructions are not observed,
this may result in serious or fatal personal injury and
damage to the installation.
• When connected, the product (or components of the
product) is/are energised with a voltage of 230V.
• To guarantee proper and safe operation, preferably the
original parts of the manufacturer should be used, or at least
parts of equal quality.
• A degree of caution should be exercised when handling the
fitting(s), also in order to prevent damage due to mechanica
overload of the components.
• Avoid bumps and other improper stresses during transport,
assembly and when using the fitting(s) and other products
• Glass covers should not be removed as this may damage
the sealing. When removing the glass cover, the warranty
will be void.
Installation
• It is important that the product is installed by a qualifie
fitter. Failure to do so will void the warranty on the product
• Whilst observing the installation guidelines, both general
and local building, safety and installation regulations must
be respected.
• Always block the traffic in the area where the product ha
been installed, before carrying out work on the installation.
• Keep the immediate environment free from animals and
(internal) transport when carrying out work.
• Use only insulated tools!
• Make sure that the electrical power supply for the product
corresponds with the required voltage and current as
indicated on the sticker.
• Check the wiring diagram of the manual for electrical
connection and take local applicable legal connection terms
into account (e.g. in the Netherlands: NEN 1010).
• Make sure that the wiring is not live and that it is not loose
or trapped between parts.
• Prior to opening a plastic cover of a fitting, make it dea
to ensure a safe work situation. For the correct lamp.The
manufacturer is not responsible for any damage arising from
incorrect assembly.
Maintenance
• Always ensure the product is dead before carrying work on
the product.
• Keep in mind that both the glass covers and the lamps will
become hot and may cause severe burns. Allow lamps
to cool off for at least 30 minutes after turning off a fittin
before handling it.
Failure
• Be aware of the potential danger of live components when
troubleshooting. Although products have been designed
for safety and are grounded, it can never be completely
ruled out that failures in this respect may cause hazards.
Using the electrical installation and carrying out related
measurements is reserved for an approved electrician.
• In all cases, ensure to make fittings dead prior to openin
the plastic cover (turn off the main switch and lock this
by using, for example, a padlock). Be prepared for, and
prevent, accidental activation by others or by means of
automated control and/or a dimmer switch.
• In case of faults, do not touch the object as long as the
power supply is switched on, if the casing has been
damaged and when the product is wet.
Removal instructions
• The symbol on the material, the accessories or packaging
indicates that this product may not be processed as
household refuse. Dispose of the device via the disposal
station for recycling of electrical and electronic equipment
within the EU and in other European countries that have
separate collection systems for used electric and electronic
equipment.