Agriframes, Journal house, Hartcliffe Way, Bristol, BS3 5RJ
Order line: 01179341790, Fax: 01179341791
Orderon-line:www.agriframes.co.uk
Assembly Instructions Classic Extra Round Gazebo Matt Black 3m
Please read these instructions carefully.
Product code: 40540-TBK
Assembly requires:
A Rubber Mallet, an Allen Key (provided), a Ladder, a Spirit Level, Pliers, a Tape
Measure and at least 2 people.
Please read the assembly instructions carefully prior to construction.
Tips:
Before positioning the Spacer Bars on the uprights, half screw in the grub screws to the Ring Clamps on the Spacer Bars, to
reduce the risk of losing the screws.
Once correctly positioned tighten the grub screw to secure the spacer bar to the uprights.
Positioning of the Spacer Bars
In many cases the position of the horizontal bars is down to personal preference. However, if you have the lattice option you
will need to leave the correct distance between bars.
Lattice Panel Option
For illustrative purposes we have only shown one side fixed with the lattice panels. Attach panels to both sides as you proceed.
1. Before assembly check Spacer Bars to ensure the grub screws are inserted into the holes on the ring
clamps.
o
Loosen these grub screws ½ way out of the hole, to ensure when the ring clamps are moved
into position the grub screw does not scratch the outer coating of the metal.
Assemble the Top of the Gazebo…
2. Slide a Spacer Bar onto the
Top semi curves, position
the spacer bar1” from the
end
of
the
curve,
as
illustrated
in
Figure1.
3. Slide a moisture seal onto
The ends of the Top Curves, until it touches
the Spacer Bar.
Figure1: Attach the Spacer Bars onto the Top Curves
4. Connect the reduced end of the Round curves into the Top Curves, covering the joins
between the poles with a moisture seal.
5. Attach a spacer bar onto the bottom of the Round Curves, position the spacer bar so it is 50”
away from the spacer bar attached onto theTopCurves,seeFigure2.
Figure 2: Attach the top curve to the Round Curve
