10
Cleanstar Sweeper
1. Safety Instructions
1
If clogging occurs in the brushes or in
the implement, turn off the engine and
clean the brushes or the implement with
an appropriate tool.
In case of damage to the sweeper or to
the implement, immediately turn off the
engine and have it repaired.
If steering causes problems, immedi-
ately bring the sweeper to a halt and
turn it off. Have the malfunction removed
without delay.
To prevent the sweeper from sliding on
slopes, make sure it is secured by an-
other person using a bar or a rope. This
person must be located at a higher po-
sition than the vehicle and at a safe dis-
tance from the attachment at work.
If possible, always work horizontally on
the slope.
End of Operation
Never leave the sweeper unattended
with the engine running.
Before you leave the sweeper, turn off
the engine.
Secure sweeper against unauthorized
use. If sweeper is equipped with igni-
tion key, remove the key. For all other
versions, remove spark plug connector.
Implements
Only mount implements with the engine
and the implement drive switched off.
Always use appropriate tools and wear
gloves when changing implements and
parts thereof.
For mounting and dismounting imple-
ments bring stands into proper position
and ensure stability.
Secure sweeper and implements
against rolling off (wheel chocks).
Beware of injuries while coupling imple-
ments.
Mount implements as specified and only
couple at specified points.
Secure sweeper and implement against
unauthorized use and rolling off when
you leave the machine. If necessary, in-
stall transport or security devices and
secure.
Weights
Always fit weights onto appropriate
weight mounting devices.
Snow Clearing
Ensure snow dozer is mounted correctly!
Wear slip-proof shoes.
When pivoting the snow dozer watch out
for crush and shear points. Adjust work-
ing speed to conditions. Operator may
be injured when the machine hits an
obstacle.
