CAUTION
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE
THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING TO
BEGIN ASSEMBLING THIS MACHINE
1. Select an area for assembly that is clean and free of any debris which might cause
persons working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane, jack, tackle, fork trucks or other
mechanical devices.
3. Preview the assembly instructions in your
operator’s manual before proceeding
further.
4. If the assembly instructions call for parts or assemblies to be blocked up, use only
blocks material that is good condition and is capable of handing the weight of the
assembly to be blocked. Also insure that the blocking material is on a clean, dry
surface.
5. Never put hands, or any part of body, under blocked up assemblies if at all possible.
6. After completing assembly, thoroughly inspect the machine to be sure that all nuts,
bolts, hydraulic fittings or any other fastened assemblies have been thoroughly
tightened.
7. Before operating the machine, thoroughly read the operation section of your
operator’s manual.
8. Before operating, read the machine section of your
operator’s manual to be sure that
any parts requiring lubrication, such as gearbox, to avoid any possible damage.
9. Before operating equipment
– if you have any questions regarding the proper
assembly or operation, contact you dealer or representative.
