background image

2

safeTY ruLes

Remember, any equipment can cause injury if operated improperly or if the user does not understand how to operate the 
equipment. Exercise caution at all times when using this equipment. 

2

1

3

4

5

6

7

9

10

8

11

carTOn cOnTenTs

Look for this symbol to point out 
important safety precautions.  It means — 

aTTenTiOn!

  Become alert!  Your safety is 

involved.

• 

NEVER allow anyone to operate the sweeper without proper instructions.

• 

NEVER permit children to operate the sweeper.

• 

NEVER push the sweeper too close to a fire.

• 

NEVER attempt to remove wire or string wrapped around the brush while the brush is rotating.

• 

ALWAYS wear eye protection while operating the sweeper.

• 

Operate the sweeper at reduced speed on rough terrain, in ditches, and on hillsides to prevent tipping and loss of 
control.

• 

Stay alert for holes or other hidden hazards.

• 

This sweeper is not meant for street or highway use. Watch for traffic when sweeping near roadways.

• 

Keep all nuts and bolts tight.

• 

The sweeper should be stopped and inspected for damage after striking a foreign object. Repair any damage before 
operating the equipment.

• 

Follow maintenance instructions as outlined in this manual.

ref qTY ParT nO

DescriPTiOn

1

45976

Handle Tube

2

2

45977

Upper Kickstand Tube

2

2-79

Lower Kickstand Tube

2

28675BL3 Pivot Catch

2

2-12BL3           Cross Brace Tube

1

28678BL3 Left Side Brace

ref qTY ParT nO

DescriPTiOn

7

1

28679BL3 Right Side Brace

1

45981

Hopper Bag

2

2-25BL3

Wheel Brace

10

1

2-26

Axle

11

1

30 in. Sweeper Housing Assembly

         

Содержание 45-0570

















Отзывы: