AGRI EASE BE-FM RDG Series, Руководство по эксплуатации и запасным частям

Страница: 16 / 31

TRACTOR REQUIREMENTS AND PREPERATION
This Finishing Mower is designed for light duty cutting such as lawn maintenance with Category 1, 3-Point
hitch and with 540 RPM PTO.
This mower is not designed for tractors over 40 horsepower. The PTO must be in good working condition.
It is recommended that only tractors with wide front axles be used with this cutter. Tricycle front wheel
arrangements are inherently unstable and tractor rollover accidents are more likely to occur.
Tractor wheel tread spacing should be increased when working on inclines or rough ground to reduce the
possibility of tipping over.
The tractor also needs lift arm stabilizer bars or sway blocks to control side movement of the cutter.
Check the tractors 3-Point hydraulic light system. Refer to your tractors operator’s manual or dealer for any
adjustments necessary to put the hydraulic system in good working order.
Be sure tires and rims are in good condition. Inflate tires to the porer recommended air pressure.
Check the tractor master shield over the PTO shaft. Make sure it is in good condition and fastened securely to
the tractor. Purchase a new shield if old shield is damaged or missing.
It is recommended that ROPS (Roll-Over Protection System) and a seat belt be installed on all tractors.
Contact your local dealer for a ROPS for your tractor.
OPERATING INSTRUCTIONS (CONT.)
CAUTION!
Be sure your tractor is in good condition. Read all the safety precautions and make sure all tractor operators
are familiar with the safety rules of operation.
The operator is responsible for the safe operation of this mower. The operator must be properly trained.
Operators should be familiar with the mower and tractor and all safety practices before starting operation.
Read the safety rules and safety signs before operation.
Recommended mowing speed for most conditions is from 2-5 MPH.
15
BE-FMxRDG