AGRETO LoadCounter II M
© AGRETO electronics GmbH
page:17
9
Maintenance and cleaning
The Counter basically does not require ongoing maintenance.
If the display is dirty, clean it for reading.
If the battery symbol is lit, replace the batteries.
10
Troubleshooting
10.1
The battery symbol lights up
The batteries need to be replaced, follow these steps:
Remove the seal and the seal wire.
Remove the housing and remove the meter.
Remove the old batteries and dispose them properly.
Insert 2 new AAA batteries into the device in the specified direction.
Mount the counter again on the mounting plate.
Seal the device again with a new seal wire and a new seal.
10.2
Loads are not counted completely
The parameters may not be set correctly for your application.
Set the pause time only high enough to be reached safely with each
load.
Only set the number of pulses high enough to ensure that they are
reached with every load.
Check the installation situation of the sensor, possibly move the sensor
closer to the magnet.
