agratronix HST-1, Руководство оператора

Страница: 8 / 64

Note: Temperature measurement settling time varies greatly with bale type. Wet and
dense gives faster settling than dry and light. Time after which 90% of temperature
change has been achieved ranges typically from 8 minutes with 60% haylage, to 30
minutes with 16% straw.
6.2 Moisture Measurement
Unless you have recently measured moisture of this bale, the meter will ask for bale
tem-perature before moisture measurement can start. There are up to 4 ways to give
the tem-perature, chosen by pressing the key drawn next to each option:
8
Measure bale temperature now. Remember
that it will take a long time for the probe
temperature to reach bale temperature.
Use the latest temperature value stored
in memory for this bale (only shown if
available).
Set temperature manually. The core tem-
perature of a large bale follows the average
ambient temperature with a delay of several
days to a couple of weeks unless a decom-
position process is heating up the bale.
Use temperature value previously used for
temperature compensation for this bale
(only shown if available).
e
u
d
p