AGPtek V88, Руководство пользователя

Страница: 14 / 34

12
5.1.2
Manual Search
Pic 5.1.2 Manual Search
5.1.2.1
Press [UP/DOWN] to choose [Manual Search] and then press
[ENTER] or [RIGHT]:
5.1.2.2
Deploy the parameters before manual scan, including following
three parameters:
1) Channel NO.: scanning station ID, every country has some default station
ID, you can modify it by using number key (0 - 9), if the station ID was set
up, other two parameters are no need to set;
2) Frequency (KHz): scanning frequency, the default frequency is
177500KHz, you can modify it by using number key (0 - 9);
3) Bandwidth: Press [UP/DOWN] to choose [Bandwidth]. Press[ENTER] for
setting the current scanning frequency bandwidth, 6MHz,7MHz,8MHz are
available, the default bandwidth is 7MHz.
5.1.2.3
After setting up the scanning parameters, press [UP/DPWN] to
choose [Manual Search] and then press [enter].
5.1.2.4
After finishing the searching, the system will exit the interface of
searching program automatically, reserve the TV program information and
then return to [Installation] menu.