6
Redial for last call Function
To redial for last called number by the Speaker, even it is in music playing mode.
Note: Make sure that your mobile phone has have last dial call used, if not, the redial for
last call function cannot be activated.
FM Function
Auto Tune Radio Frequency:
In Bluetooth mode, press button M to enter into FM mode.
1. Press and hold button
to enter into auto searching mode.
(1) The FM radio will search up the frequency from 87.5 MHz to 108.0MHz and will save
the searched stations automatically.
(2) When finished searching, it will play from the firstly searched station automatically.
2. Press button M again to enter into Japanese FM mode. A "JPN" icon will show on the
screen, auto searching method is the same as above.
FM playing control:
To switch back to Bluetooth mode, press twice button M.
Press button
to pause/resume the music
Press button
go to next station
Press button
go to previous station
Press and hold button
increase the volume level
Press and hold button
decrease the volume level
Low Power Reminder and Auto Sleep
1. The Bluetooth Speaker will send tones from speaker by every minute. When you
heard this reminder, please connect the device to the USB power for charging, if you
still want to use the device.
2. If not, the Bluetooth Speaker will power off automatically when the battery is keeping
low energy level in some minutes.
3. In this case, the device cannot be turned on, until you recharging the battery at least
10~15 minutes, because the rechargeable battery has not enough energy.
Reset the Device
1. In some circumstances the device’s function may hanging and need to reset. To reset
the Bluetooth speaker;
2. Press and hold button
and
at the same time. The device is reset and will turn off
automatically.
3. After that, turn on the Bluetooth Speaker by press and hold button
.
Note: Do not reset the device if it is in properly working.
Press the
for twice enter into redial function, the playing music will pause
and switch to hand free function for redial.
Press the
again
hang up the redial call