AGP V28B, Руководство пользователя

Страница: 14 / 65

V28B Chapter 2 Hardware Installation
13
1-2 Normal (Save data) 2-3 Clear data
To clear CMOS, please follow the steps below:
1. Power off the system and unplug the chassis AC power cord.
2. Short JP7 at pin2-3 for 10-15 seconds.Set JP7 back to its Normal position at pin1-2.
3. Plug the AC power cord to the chassis.
4. Power on the system and load the BIOS setup defaults.
Note:
You can clear CMOS by shorting 1-2 pin for 10-15 seconds,
while the system is off. Then, return to 2-3 in position, Avoid
clearing the CMOS while the system is on, it will damage the
mainboard.
1 1