AGP EV21, Инструкция по эксплуатации

Страница: 8 / 12

8
control which could cause personal injury.
Protect your eyes from injury with safety glasses or goggles.
WARNING: Keep the cord behind the operator and away from mixing area to prevent
it from becoming entangled in the paddle.
After completing the mixing operation, release the power switch and wait for the coasting
paddle to stop completely before putting the machine down.
Use hex shank paddle with the chuck or M14 shank paddle with the M14 adaptor
(Paddle not included)
KEEP TOOL CLEAN
Periodically blow out all air passages with dry compressed air every 100 hours of use. All plastic
parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts.
They could possibly dissolve or otherwise damage the material. Wear safety glasses while using
compressed air. Every 200 hours, have the lubricant in the gearbox replaced by a qualified
service center.
MAINTENANCE
THE CARBON BRUSHES
The carbon brushes are a normal wearing part and must be
replaced when they reach their wear limit.
To replace: simply remove the brush caps and withdraw the
old brushes. Replace with new brushes (always replace as a
pair) ensuring that they align properly and slide freely. Then
replace the brush caps.
Carbon cap