4
Intex Giraffe
®
GHOST
™
intexinternational.com
5
WARNING: To reduce the risk of injury user must read and understand operator’s manual.
4. Power Tool Use & Care
a
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
b
Do not use the power tool if the power does not turn it on or off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c
Disconnect the plug from the power source and/or the battery pack from the power tool before
making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
e
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may effect the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g
Use the power tool, accessories and tool bits etc. In accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power tool's
for operations different from those intended could result in a hazardous situation.
h
Keep handles dry, clean and free of oil and grease. Slippery handles do not allow for safe handling and
control of the tool in unexpected situations. Power tools that have the switch on invites accidents.
5. Service
a
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
b
Only use original parts for repair and maintenance. The use of incompatible accessories or spare
parts can result in electric shocks or other injuries.
Symbols used in this manual
WARNING
- To reduce the risk of injury, user must read instruction manual. Use these operating
instructions to familiarize yourself with the product, the proper use and the safety instructions.
Keep these operating instructions in a safe place for future uses.
For safety reasons, children and young people under the age of 16, as well as people not familiar with these
operating instructions, may not use this product. Persons with reduced physical or mental abilities may use
the product only if they are supervised or instructed by a responsible person.
The following symbols are used in this manual:
Type and source of the danger:
Failure to observe this danger notice may cause physical injury or death.
Type and source of the danger:
This danger notice warns of damage to the appliance, the environment
or other property.
Note:
This symbol signifies information that may help you reach a better
understanding of the process involved.
Always wear eye protection.
Always wear a dust mask.
Wear safety approved hard hat.
Do not dispose of electric tools, accessories and packaging together
with household waste material.
Class II Tool.
V
Volts.
A
Amperes.
Hz
Hertz.
W
Watt.
~
Alternating current.
n
Rated Speed.
min
-1
Revolutions or reciprocating per min.
