22
F E R R A R I 3 1 2 t4
P a c k 1 1 . S TA G e 9 8
98-02
Set the upturned
bodywork on your work
surface. To avoid damaging the
paintwork, place it on a soft or
microfibre cloth.
98-01
This stage begins the instructions that
will add detail to and complete the bodywork
of the model. Gather the parts from stages
98, 99 and 100 along with the inner coverings
(stages 94 and 95) and the wing mirrors (stages
96 and 97), as shown in the image above.
98-03
Take the right inner covering (stage 95)
and slot the rear tab into the cross joint: then
bring the two seats of the screws together with
their respective posts.
98-04
Raise the front part before it is fixed in
place; the image shows how to position the
front tab.
03
01
04
02
