10
AGM Global Vision
2 OPERATING INSTRUCTIONS
2.1 GENERAL
This chapter contains a description of the basic operations and functional
settings to include battery installation, remote switch installation, mode
selection, “FIRE” button, power settings, laser wave mode selection, Illuminator
focus, and ballistic adjusters.
DANGER:
Visible and invisible laser radiation - avoid direct exposure to the beam.
•
Do not stare into the near-IR beam of either the laser aimers or the laser
illuminator.
•
Do not look into the laser beams through magnified optics such as
binoculars or telescopes.
•
Do not point the lasers at mirrors or highly reflective surfaces.
•
Do not point, direct, or shine the lasers into the eyes of other individuals.
CAUTION:
Do not store the RMSAL with the battery installed.
2.2 INSTALLATION AND MOUNTING
2.2.1 BATTERY INSTALLATION
Unscrew the knurled battery cap located on the central rear bulkhead of the
RMSAL. Install the 123A 3.0VDC Lithium battery with positive terminal facing
forward in accordance with the battery orientation icon on the top of the RMSAL
Assembly. Hand-tighten to fully secure the cap onto the housing to ensure that
the battery cap O-ring is contact pressed. Batteries load from the aft so no need
to remove RMSAL.
