Introduction
Dialup / Leased Line Modem
3
When used with a Leased-Line connection one DLM must be set up to “originate” and the
other to “answer”. After approximately 30 seconds after power up one DLM will start emitting
a tone and the other DLM will listen for the tone. Once the tone is detected the two DLM’s will
negotiate a connection as in a Dial-Up connection.
NOTE: In
Leased-Line
mode the AGM Electronics DLM is only compatible with another
AGM Electronics DLM. Connection to other Leased-Line modems is not
supported. Also, multi-drop connections are not supported.
When you order your DLM indicate how you would like to have the DLM configured. AGM
Electronics Inc. will configure your DLM at the factory free of charge.
The hermetically sealed assembly minimizes installation costs.
