AGM COBRA Series, Руководство пользователя

Страница: 20 / 32

20 AGM Global Vision
NOTE:
After configuration is complete, select EXIT on the MAIN MENU and push the SELECTION button
to leave the MAIN MENU. All settings will be saved.
10. To operate the Cobra in short-time activation mode, turn the switch to STB (standby). To
activate the Cobra, press the remote control button once. Press the remote control button again
to deactivate the Cobra.
CAUTION:
DO NOT leave the equipment activated when not in use.
2.3.2 COBRA SHUT-DOWN
NOTE:
Shut down the Cobra properly to avoid losing unsaved settings and data.
Shut-down the Cobra as follows:
1. Be sure to save your settings and data.
2. Turn off the Cobra.
3. Place the protective cap on the objective lens.
4. Disconnect the cable (if applicable).
5. Place the protective cap on the connector.
6. Remove the batteries.
CAUTION:
Do not store the Cobra with the batteries still installed.
7. Store the Cobra and all accessories in the carrying case.