13
ASP TM-384
USER MANUAL
4. Set the bottom of the target.
a) Move the monocular slightly to place the
mark below the target bottom.
b) Press
to confirm.
The distance between you and the target will display on the upper left corner of the live view
interface.
NOTE:
Enter the distance measurement interface, press
to view the measured distance.
2.2.3 HOT SPOT MARK
In the menu, select
/
and press
to enable/disable hot spot mark (marking the spot
of highest temperature).
When the hot spot mark is enabled, the
mark displays in the spot of the highest temperature.
When the scene changes, the
mark moves.
2.2.4 RECORD/CAPTURE
Video Recording
In the view mode, hold the
button for three seconds, and the monocular starts to record. In
the upper left corner, the recording time displays.
After recording the video, hold the
button for three seconds again, and the monocular stops
recording.
Snapshot Capturing
In the view mode, press the
button, the live view freezes for one second, and the snapshot
is captured.
2.2.5 DIGITAL ZOOM
Press the
button in the view mode, the live view will switch between 1× digital zoom and 2×
digital zoom.
2.2.6 SHUTTER RELEASE
In the view mode, press the
button once to release the shutter once.
FIGURE 2-8. VIDEO RECORDING
