AGM Global Vision
26
2.3 CLIENT SOFTWARE INTRODUCTION
Install T-Vision client software on your mobile phone first, and then connect
your phone to the hotspot of the clip-on. Refer to chapter 2.2.3 for details of
hotspot connection.
NOTE:
The device password is set by user at first activation. If the password was lost
or forgotten, it can be reset. To make a reset, provide the following action:
1. When the
clip-on
is turned on, hold
button to activate the OSD menu.
2. Select menu item and press button to restore all parameters to
default settings.
1. Run the app and connect the phone or tablet with the device.
2. If the device is inactivated, set the password and activate it. If the device is
activated, enter the password to add it to the app.
3. When the device is added, the live view can be seen. You can view the
interface of the clip-on on the software. User can change such image
parameters as brightness, contrast, zoom, palettes directly via phone or
tablet as well as record video on phone/tablet memory.
Rattler TС19-256
FIGURE 2-14. CLIENT SOFTWARE
Device[Rattler TС19-256]
