AGM Global Vision ASP TM25-384, Руководство пользователя

Страница: 8 / 24

AGM Global Vision 8
2 OPERATING INSTRUCTIONS
2.1. BASIC OPERATIONS
2.1.1 UNPACKING
The following steps must be completed prior to each mission.
1. Open the carrying case, remove the monocular, and verify that all components
are included.
2. Inspect the monocular for any obvious evidence of damage to the optical
surfaces, body, eyecup, control buttons, etc. Ensure that all optical surfaces
are clean and ready for use. Clean all optical surfaces with a lens tissue.
2.1.2 CHARGING THE MONOCULAR
When the monocular is turned on, the OSD (on-screen display) shows the
battery status. When you see the low battery status, charge the monocular and
ensure it’s working properly.
NOTE:
Please charge the monocular with the delivered USB cable and power adapter.
The charging temperature should be 0°C to 45°C (32°F to 113°F).
1. Lift the USB cover.
2. Plug in the USB cable and connect the other terminal into the power adapter.
3. Plug the power adapter to the power source.
USB COVER
USB INTERFACE
BATTERY STATUS
INDICATOR
FIGURE 2-1. USB INTERFACE AND BATTERY INDICATOR