Agilent Technologies TwisTorr Medium-TMP X3501-64006, Руководство пользователя

Страница: 250 / 284

17 Technical Information
How to Use by Front Panel
Measures
Pressing once on the MEASURES pushbutton, the information is
displayed:

P=XXX W is the power absorbed by to the pump.

T=XX °C is the pump bearing temperature.

XXXX Hz is the rotational frequency of the pump.

I=X.XXA is the current absorbed by the pump.
On pressing the key again, the display goes back to main screen
If not otherwise specified the following status are showed with a
solid symbol (no blinking request). Not showed in programming.

PD Power Derating (blinking warning) – Not used in
HCOMP and HFLOW MODE

Vent when active (blinking) the VENT VALVE is OPEN
or a CONTROLLER VENT BRAKING is active

HS Shows the high speed selection: the controller is at
HIGH SPEED.

LS Shows the low speed selection: the controller is at
LOW SPEED
S T A T U S X X X H z
M E A S U R E S
P = X X X W T = X X ° C
I = X . X A
250/284
TwisTorr Medium-TMP Rack Controller User Manual / 87-901-049-01 (B)
S T A T U S X X X H z
PD
Vent
HS
LS
M O D E