Agilent Technologies R Series, Руководство пользователя

Страница: 17 / 220

7
BenchCel Microplate Handling Workstation User Guide Addendum
7. Calculate the jog distance:
Jog distance = Z
initial
– Z
adjusted
In the following example, the jog distance is –5.00 mm.
8. Calculate the adjusted Orientation sensor offset:
Adjusted Orientation sensor offset =
Initial Orientation sensor Jog distance
In the following example, the adjusted orientation sensor offset is
3.00 mm.
9. Type the adjusted orientation sensor offset in the Labware tab.
10. Select the next stack, and then click Move to Sensor. Check the Notch
Sensor readings. The notches should have much lower readings than
the corners. In addition, the difference between the notch readings
and corner readings should be at a maximum.
11. Repeat step 10 for the remaining stacks.
Z
initial
50.27 mm
Z
adjusted
55.27 mm
Jog distance –5.00 mm
Initial Orientation sensor offset 8.00 mm
Jog distance –5.00 mm
Adjusted Orientation sensor offset 3.00 mm