Agilent Technologies Pump Module, Оригинальное руководство пользователя

Страница: 11 / 34

9
Pump Module User Guide
Autofilling options
Pump Module User Guide
IMPORTANT
The ports described in items 4- 7 are not Ethernet ports.
Related information
Autofilling options
About this topic
This topic describes the following reservoirs and wash stations that can be
automatically filled and emptied using the Pump Module:
•
Agilent Auto Filling Reservoir
•
Agilent Tip Wash Station (formerly known as the MicroWash Reservoir)
•
Agilent 8- Channel Wash Station
•
Agilent Open Wash Reservoir
Agilent reservoirs are approved for use with most reagents and solvents. If you
have questions on the use of a particular chemical or solvent, contact
Automation Solutions Technical Support before use.
5
SHELF B
port Connects the communication cable from a second Weigh
Shelf, Weigh Station, or Weigh Pad.
IMPORTANT
Agilent Technologies recommends one Pump
Module for each pairing of reservoir and Weigh Shelf,
Weigh Station, or Weigh Pad.
6
COM IN
port Connects the communication cable from a Pump Module
to the controlling liquid- handling device to enable
communication.
7
COM OUT
port Connects the communication cable from one Pump Module
to another Pump Module in a series. Up to five Pump
Modules and three Weigh Stations can be connected and
controlled through one liquid- handling device. For details,
see
“Connecting power and communication” on page 15 .
8
Port Not used
Item Feature Description
For information about... See...
Pump Module specifications “Laboratory setup requirements” on
page 6
Pump Module maintenance “Maintenance and troubleshooting” on
page 27