4
N9030-90019
N9010/20/30AK-REA
Hard Drive Disk or Solid State Drive Replacement Procedure
Hard Drive Disk or Solid State Drive Replacement
Procedure
The hard disk drive and solid state disk drive will be referred to as HDD/SSD through out
this document.
CAUTION
Follow the appropriate Electrostatic Discharge (ESD) procedures. ESD can
damage or destroy electronic components. All work on electronic assemblies
should be performed at a static-safe workstation. Refer to the documentation
that pertains to your instrument for information about static-safe
workstations and ordering static-safe accessories.
Removing the HDD/SSD
1. Turn the instrument off and remove the AC power cord.
2. Using a T-10 torx driver, loosen the rear panel thumb screw and remove the existing
disk drive tray assembly from the instrument.
Figure 1
HDD/SSD Removal
Thumb
screw
Содержание N9010AK-REA
Страница 4: ...iv Installation Guide ...
Страница 6: ...Contents 2 Contents ...
Страница 7: ...N9030 90019 1 N9010 20 30AK REA ...