Agilent Technologies N5241A, Руководство по обслуживанию

Страница: 80 / 354

3-46 Service Guide N5242-90001
Tests and Adjustments PNA Series Microwave Network Analyzers
Adjustments N5241A/42A
Figure 3-20 Equipment Setup 2 for the Receiver Adjustment
1. When prompted, reconnect an RF cable between the network analyzer test ports 1 and
2.
2. When prompted, disconnect the cable at port 2 and insert the ECal module between
port 2 and the free end of the cable. Connect the ECal module directly to port 2 without
using any adapters if possible. See
Figure 3-21
Figure 3-21 Equipment Setup 3 for the Receiver Adjustment
The entire procedure takes about 15 to 30 minutes.