Installation
15
BP User Guide
Performing a Radio Test
Perform a Radio Test when you set up the BP Unit, change batteries,
or change the testing location.
1. The Radio Test button appears as a circle with a “
T
” inside it on
the lower left of the display (for SYSTOLIC, DIASTOLIC,
PULSE) on the front of the BP Unit. Press and hold the Radio
Test button for at least 3 to 5 seconds until the
Home Hub starts beeping (at a rate of one beep per second).
Note: If the Home Hub’s
using phone
light turns on while performing
the Radio Test, stop and wait until the
using phone
light turns off
before resuming the Radio Test.
2. If the Home Hub does not beep, determine if there are any
obstacles (such as large metal objects) between the BP Unit and
the Home Hub.
Radio Test button
M3815-90001-UG-Eng-revD.qxd 5/1/01 4:20 PM Page 15
