About this guide
2
G5581A Microplate Labeler Quick Guide
About this guide
This guide summarizes the operator instructions in the
G5581A Microplate Labeler User
Guide
.
This guide assumes the following:
•
The Microplate Labeler is installed correctly, the device profile for the specific
Microplate Labeler configuration is already created, and the teachpoints are already
set. For setup instructions, see the
G5581A Microplate Labeler User Guide
.
•
You are familiar with the VWorks Automation Control software. See the
VWorks
Automation Control Quick Start
for an overview. For detailed instructions, see the
VWorks Automation Control User Guide
.
Note:
This guide does not contain instructions for using the ActiveX Control to run the
Microplate Labeler. For information on how to access Microplate Labeler Diagnostics
using the ActiveX control, see the
Microplate Labeler ActiveX User Guide
.
Where to find the user documentation
To access the user guides for Agilent Automation Solutions products, do one of the
following:
•
From within VWorks software, select
Help
>
Knowledge Base
or press F1.
•
From the Windows desktop, select
Start
>
Agilent Technologies
>
VWorks
Knowledge Base.
•
Go to the online VWorks Knowledge Base at
.
Contacting Agilent Technologies
Web:
Contact page:
https://www.agilent.com/en/contact-us/page
Documentation feedback:
