User Information
Bar code reader
5
Installation
1
Locate the recess in the bottom front of the tray. The BCR
must be located at this location. See
Figure 2
.
2
Locate the mounting screw holes. Some trays have two holes
that are flush with the bottom of the recess. Those trays
require the spacer. Other trays have raised areas around
three mounting holes and do not need the spacer.
The tray shown in
Figure 2
is the two hole version. This style
tray requires use of the spacer to mount the BCR.
3
If the spacer is needed
, align the holes in the spacer with the
mounting holes in the bottom of the tray. Place the mounting
bracket under the spacer, insert the two long screws and
tighten them firmly.
If the spacer is not needed
, place the mounting bracket
under the mounting holes in the bottom of the tray. Insert the
three short screws and tighten them firmly.
4
Run the cable to the back of the tray and connect it to the
Barcode
receptacle. Tighten the two securing screws. See
Figure 3
.
Figure 2
Mounting location
Mounting screw holes
Spacer mounts in this recess
if needed
