6
Multi-Trace Configurations (NA Mode)
You can display multiple traces on the FieldFox screen.
The above image shows a 3-trace configuration.
Tr1
is
the
ACTIVE
trace as indicated by the highlighted
Tr1
annotation in the upper left corner.
The Frequency Range, IF BW, Resolution, and Output
power is common to all traces. All trace settings, such
as format, markers, and limit lines, are applied to the
ACTIVE
trace in the same manner as when a single
trace is present.
To select a multi-trace configuration:
Press
Trace 6
then
Num Traces
Then choose a multi-trace configuration.
To activate a trace in order to change a setting:
Use the
▲|▼
arrows
to scroll through the traces -
OR
Press
Trace 6
then select
Trace 1
,
Trace 2
,
Trace 3
, or
Trace 4
, Only traces that are shown
can be activated.
By default with Multi-trace configurations, Markers
that are applied to one trace are applied to ALL traces.
