
16
Installation Note E8356-90052
Step 5.
Replace the Model Number Nameplate on the Front Panel
Refer to
Remove the Old Nameplate
1. Using a sharp object such as a knife blade, lift one end of the old nameplate (item
①
). Be
careful not to scratch the painted surface.
2. Using your fingers, pull the nameplate completely off of the front panel and discard it.
3. If any adhesive remains on the front panel surface, it can be removed by rubbing it with
your finger. Do not use a sharp object to remove this adhesive. If necessary, the surface can
be cleaned with isopropol alcohol.
Install the New Nameplate
1. Remove the protective backing from the new nameplate to expose the adhesive. Avoid
touching the adhesive with your fingers as this may affect its ability to adhere to the front
panel surface.
2. Loosely align the new nameplate over the recess in the front panel and apply lightly.
3. Once the overlay is properly aligned, press it firmly onto the surface to secure it.
Figure 6
Model Number Nameplate Replacement