Agilent Technologies E5070A ENA Series, Инструкция по установке и быстрому запуску

Страница: 10 / 63

10 Chapter 1
Introduction of This Manual
Contents of This Manual
Contents of This
Chapter
Contents of This Manual
This Quick Start Guide has been prepared to quickly familiarize users with the
E5070A/E5071A basic oeration and measurement. The following shows the contents of
this manual.
NOTE The Chapter 3, “Quick Start Guide,” on page 37 describes only a measurement example of
the bandpass filter. For other measurement examples, see Chapter “Measurement
Examples” in the
E5070A/E5071A User’s Guide .
o
Contents of This Manual page 10
Describes the chapter configuration of this manual ( Installation and Quick Start
Guide ) and its contents.
o
Overview of the E5070A/E5071A page 11
Describes the major features of the E5070A/E5071A.
o
Chapter 1, “Introduction of This Manual”
This chapter provides an overview of this manual to use this manual efficiently
and describes the features of the Agilent E5070A/E5071A briefly. See this
manual first when you use the E5070A/E5071A for the first time.
o
Chapter 2, “Installation”
This chapter provides information about how to set up the Agilent
E5070A/E5071A RF network analyzer, and about daily maintenance.
o
Chapter 3, “Quick Start Guide”
This chapter describes the functions of parts on the front panel and display area
of the Agilent E5070/E5071A RF Network Analyzer. Using the example of
measuring a bandpass filter, you will quickly learn how to easily operate the
E5070/E5071A by understanding the basic measurement procedures and
operation of the E5070/E5071A.
o Appendix A, “Manual Changes,”
This appendix contains the information required to adapt this manual to versions
or configurations of the E5070A/E5071A manufactured earlier than the current
printing date of this manual.