Agilent Technologies E2050, Руководство по установке и настройке

Страница: 15 / 111

Chapter 1 15
Introduction
E2050 Hardware Description
E2050 Hardware Description
In addition to this guide, the E2050 product package consists of:
n
E2050 LAN/GPIB Gateway Front Panel
n
E2050 LAN/GPIB Gateway Rear Panel
n
AC/DC Adapter and Standard AC Power Cord
n
Rack Mount Kit (Optional)
E2050 LAN/GPIB Gateway Front Panel
As shown in the following figure, the front panel of the Gateway contains
8 light-emitting diodes (LEDs) that indicate the status of the Gateway.
E2050 LAN/GPIB Gateway Front Panel
LED Color Meaning When Illuminated
Power Green Power is applied to the Gateway.
Fault Red Diagnostic failure of the hardware. This LED will normally be off.
LAN Conn Yellow A TCP/IP port is open (Telnet or a LAN connection). Flashes at a
fast rate for BOOTP or a BOOTP with TFTP configuration. Flashes
at a slow rate when the default IP address (
192.0.0.192
) is used
(after the
Config Preset
button is pressed).
LAN Tx Yellow Flashes at 10 Hz rate when transmitting packets on the LAN.
LAN Rx Yellow Flashes at 10 Hz rate when receiving packets from the LAN.
GPIB Talk Yellow The Gateway is configured to TALK on the GPIB bus.
GPIB Listen Yellow The Gateway is configured to LISTEN on the GPIB bus.
GPIB SRQ Yellow The GPIB SRQ line is asserted.
E2050 LAN GPIB
LAN/GPIB Gateway
Power Fail Conn Tx Rx Talk Listen SRQ