Agilent Technologies BenchCel, Руководство пользователя

Страница: 13 / 196

3
1 Safety guidelines
Safety and regulatory compliance
BenchCel Microplate Handler User Guide
Related information
Safety and regulatory compliance
About this topic
This topic lists the compliance regulations and standards for the BenchCel Microplate
Handler.
Note: Earlier models of the BenchCel Microplate Handler may not comply with all the
standards listed in this topic.
Compliance information
The BenchCel Microplate Handler is considered partly completed machinery as defined
by the Machinery Directive of the European Union. Therefore, the BenchCel Microplate
Handler is provided with a Declaration of Incorporation and no CE marking. The
BenchCel Microplate Handler is intended to be integrated into a conforming completed
machine (workstation). A customer in the European Union (EU) that acquires a
standalone BenchCel Microplate Handler is responsible for this integration and for CE
marking the completed workstation. The BenchCel Microplate Handler is designed to
comply with the standards listed in the table below.
Unless specifically requested by the customer, BenchCel Workstations provided by
Agilent Technologies are configured to conform to the Machinery Directive and bear
the CE marking. The Declaration of Conformity shipped with the BenchCel Workstation
describes the specific configuration that has been evaluated for conformity. Any
deviations from the specified configuration may invalidate the Declaration of
Conformity. See the Declaration of Conformity for details.
An EU customer that requests Agilent Technologies to provide a nonconforming
BenchCel Workstation must assume responsibility as the manufacturer for completing
the workstation in conformity with the applicable directives, including the Machinery
Directive. In the case of a nonconforming BenchCel Workstation, each component that
Agilent Technologies supplies will carry a Declaration of Conformity or Declaration of
Incorporation, as appropriate, to be used by the manufacturer to compile the technical
construction file.
For information about... See...
General precautions, intended product
use statement, and list of safety labels Automation Solutions Products General
Safety Guide
Regulatory compliance “Safety and regulatory compliance” on
page 3
Stopping in an emergency “Emergency stops” on page 5
Safety equipment “Safety equipment and features” on page 8
Potential hazards specific to the
BenchCel Microplate Handler “Potential safety hazards” on page 10