Agilent Technologies AIC 5000, Руководство по установке

Страница: 36 / 64

30 AIC Revision B Installation and Configuration
Step 4. Add a domain user to the AIC local Administrators
group
Since users will not be logging on the AIC to perform everyday
tasks, the AIC needs a domain account with access to the
enterprise path.
1. Click Start , right-click My Computer , and then click Manage.
2. On the console tree, click System Tools followed by Local
Users and Groups and then click Groups.
3. In the right pane, double-click Administrators .
4. Type the domain and then click Add . Click OK.
5. When prompted, enter the network credentials for user with
rights to verify users on the domain. Click
OK followed by OK .
Step 5. Run DCOMServerSettings
This program is used to provide a context for the AIC to
communicate with the domain and the Enterprise.
1. Select Start and then click Run .
2. Type “c:\EZChrom Elite\DCOMServerSettings.EXE” (inlcude
the quotation marks) and click ENTER .
3. Make the following entries:
* Select "Auto Logon" for the "Run As" selection

Enter the username and password of the network user that
was added to the local Administrators in the section
Add a
Domain User to the AIC Local Administrators Group
(remember that the password will need to be changed here
if the user's password is changed on the network). The name
must be entered as xxx\yyy where xxx is the domain and
yyy is the username.