manualshive.com logo in svg

Agilent Technologies Acqiris DC110, Руководство пользователя

Поделиться
Скачать
Agilent Technologies Acqiris DC110 Скачать руководство пользователя страница 11

 

 

User Manual: Family of 8-bit Digitizers 

 

Page 11 of 66 

 

The PCI-8570/PXI-8570 User's Manual (Rev. 1.00) section 2.4 contains the software installation instructions. These 
should be executed before allowing the hardware installation process to look for the driver. If you have an AdLink 
CD Version 2004A4 or later you can use it; if not you should download the latest driver from the WEB site 
(

http://www.adlinktech.com/

). You can then continue with the Hardware Installation. A reboot will then be 

necessary. At this point the Stargen Fabric PCI Adapter and the Stargen Aruba Fabric-to-PCI Bridge should appear 
correctly installed under System Devices in the Device Manager. 

NOTE:

 If you have an AdLink CD Version 2005A3 or later you can find 8570install.exe in the folder X:\Driver 

Installation\PXI Platform\PXI Extension\PCI_PXI-8570\Wnt2kxp and the starfab1.inf file in the folder X:\Driver 
Installation\PXI Platform\PXI Extension\PCI_PXI-8570\Win98. 

2.2.

 

Installing the Software under Windows 

2.2.1.

 

Warnings 

If Setup detects a previous installation of Acqiris software on your system, a warning screen will be displayed. It is 
recommended to exit Setup and uninstall older versions. 

The installer from software releases prior to 

Acqiris Software 2.0

 installed the Digitizer Driver DLL files into the 

System directory. These will be removed by Setup. If you wish to keep the old installation on your system, you 
should exit Setup, and move all Acqiris driver files (acqiris*, acqrs* and acqir*) to some archive directory. 

The DLL files will be installed into the bin subdirectory of the Acqiris software root, and the corresponding path will 
be added to the PATH environment variable. 

2.2.2.

 

Multiple Versions 

With the software installation from 

Acqiris Software 2.0

 (or above), it is possible to keep multiple versions on the 

same system, but you must specify a different root directory (i.e. Install Folder). If you keep the same directory, 
Setup will overwrite your previous installation. 

To go back to a previous version, you must change the PATH environment variable and reinstall the Kernel driver. 
Under Windows 2000/XP: 

1.

 

Copy the SYS file from 

<old_AcqirisSoftware_root>\bin\kernel

 to the 

Windows\System32\drivers

 directory.  

2.

 

Change the AcqirisDxRoot, AcqirisDxDir and PATH environment variables to the old root.  

3.

 

Reboot the computer. 

2.2.3.

 

Installation 

Before installing the Acqiris hardware, you should complete the following steps to install the software for Windows 
2000/XP. 

NOTE: You will need administrator privileges to complete the software installation under Windows 
2000/XP. 

1.

 

Insert the 

Acqiris Software CD

 into the CD-ROM drive of your computer. If the Autorun program does not start 

automatically (Autoplay disabled), you can start it manually, or navigate to the 

AcqirisSoftware\Windows

 folder 

in order to display the files included. 

2.

 

Choose 

Install AcqirisSoftware for Windows 2000/XP

 (or run 

Setup.exe

 from the

 

AcqirisSoftware\Windows

 folder). After several seconds for initialization the following screen will appear. 

 

Содержание Acqiris DC110



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды