Agilent Technologies 85105-60047, Установочная инструкция

Страница: 6 / 10

6 Installation Note 85105-90023
A24 Installation Procedure
1. Position the new switch and bracket assembly with the three soldered control cable
connections toward the bottom and front of the instrument. The bracket side with two
screw holes should be facing towards the existing bracket (refer to
Figure 2 ).
NOTE The control cable terminals on A24 will be facing the front of the 85105A, and the
2.4 mm connectors will be facing the rear.
Figure 2 Installation of new A24 (side view)
new picture needed