Agilent Technologies 85051B, Руководство пользователя и сервисное руководство

Страница: 33 / 54

85051B 3-15
Use, Maintenance, and Care of the Devices
Making Connections
Figure 3-8 Airline Center Conductor Placement
3. Remove the cap from the “A” end of the outer conductor. Leave the cap on the “B” end of the airline to
prevent the center conductor from falling out of the airline.
4. Remove the center conductor from its plastic case. Make sure you select the correct center conductor
for the airline you are connecting. Refer to Figure 2-3 and Figure 2-4 on page 2-5 for illustrations of both
center conductors.
5. Insert the center conductor into the outer conductor so that the mark on the center conductor is closest
to the “A” end of the outer conductor. See Figure 3-8 . Do not let the center conductor scrape the edge of
the outer conductor or damage may result.
6. Bring the “A” end of the airline to the port 1 cable. Gently press on the cap at the “B” end of the airline so
that the center conductor tip emerges from the “A” end of the airline. See Figure 3-9 .
Figure 3-9 Airline
NOTE To avoid damaging the airline center conductor, always keep it in line with the connecting
center pin.
7. Insert the tip of the center conductor (emerging from the “A” end) into the cable center conductor. See