Agilent Technologies 8504B, Руководство пользователя

Страница: 236 / 296

FINAL TRIM SIZE : 7.5 in x 9.0 in
Reference
K eys, Softkeys, and Connectors
TITLE FILES
Leads to the title le menu where the default le titles can be modied.
K ey P ath: 4 SA VE 5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
STORE TO DISK ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
TITLE FILES
TITLE REGn
Selects an internal register to be retitled and presents the title menu and the
character set.
K ey P ath: 4 SA VE 5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
TITLE REGISTER ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
TITLE REGn
TITLE
REGISTER
Leads to the title register menu where the default register titles can be
modied.
K ey P ath: 4 SA VE 5 ,
N
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
TITLE REGISTER
TRIGGER:
HOLD
Stops the measurement sweep . The sweep is indicated by a red dot moving
left to right below the graticule . During retrace (red dot moving right to
left), the mirror returns to its start position and then holds . Hold freezes the
current data trace on the screen.
K ey P ath: 4 MEAS 5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
TRIGGER: HOLD
UPPER LIMIT
Sets the upper limit response value for the start of the segment. If a lower
limit is specied, an upper limit must also be dened. If no upper limit is
required for a particular measurement, force the upper limit value out of
range (for example +200 dB).
When
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
UPPER LIMIT or
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LOWER LIMIT is pressed, all the segments in the
table are displayed in terms of upper and lower limits , even if they were
dened as delta limits and middle value .
If you attempt to set an upper limit that is lower than the lower limit, or vice
versa, both limits will be automatically set to the same value .
K ey P ath: 4 SYSTEM 5 ,
N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
LIMIT MENU ,
N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
EDIT LIMIT LINE ,
N NNNNNNNNNNNNN
EDIT ,
N
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
UPPER LIMIT
5-49