Agilent Technologies 85032F, Руководство пользователя и сервисное руководство

Страница: 43 / 48

85032F 6-3
Replaceable Parts
Introduction
Table 6-1 Replaceable Parts
a
a. Refer to “Clarifying the Terminology of a Connector Interface” on page 1-4.
Item
No.
Description Qty Agilent Part
Number
Calibration Devices (Type-N 50
Ω
)
1 Offset open –m– 1 85032-60013
2 Offset open –f– 1 85032-60014
3 Offset short –f– 1 85032-60015
4 Offset short –m– 1 85032-60016
5 Broadband load –m– 1 85032-60017
6 Broadband load –f– 1 85032-60018
Protective End Caps for Connectors (Type-N 50
Ω
)
7 Protective end cap 0.625-ID, black as required 1401-0225
8 Protective end cap 0.812-ID, black as required 1401-0214
Calibration Kit Storage Case
9 Box (without foam pads) 1 5180-8446
10 Box pads (top) 1 85032-80028
11 Box pads (bottom) 1 85032-80026
12
Disk holder (not shown in
Figure 6-1
)
1 5180-8491
Miscellaneous Items
13 Connector care-quick reference card
(not shown in
Figure 6-1
)
1 08510-90360
14 Calibration constants disk (875 x and 872 x series) 1 85032-10003
15
User’s and service guide
b
b. Refer to “Printing Copies of Documentation from the Web” on page -iii.
1 85032-90021
Optional Adapters
c
(Type-N 50
Ω
)
c. The adapters are included when the applicable option is ordered.
16
Type-N –m– to type-N –m– (Option 200) 1 85032-60019
17
Type-N –f– to type-N –m– (Option 300) 1 85032-60020
18
Type-N –f– to type-N –f– (Option 100) 1 85032-60021
19
Type-N –f– to 7-mm adapter (Option 500) 2 85054-60001
20 Type-N –m– to 7-mm adapter (Option 500) 2 85054-60009