Agilent Technologies 75000 SERIES B, Руководство по обслуживанию

Страница: 16 / 68

Recommended
Test Equipment
Table 1-1 lists the test equipment recommended for testing, adjusting, and
servicing the FET Multiplexers. Essential requirements for each piece of test
equipment are described in the Requirements column.
Table 1-1. Recommended Test Equipment
Instrument Requirements Recommended
Model
Use*
Controller, GPIB GPIB compatibility as defined by IEEE
Standard 488-1987 and the identical
ANSI Standard MC1.1: SH1, AH1, T2,
TE0, L2, LE0, SR0, RL0, PP0, DC0,
DT0, and C1, 2, 3, 4, 5.
HP 9000 Series 300
or
IBM Compatible PC with
BASIC
F,O,
P,T
Mainframe Compatible with FET Multiplexer Agilent E1300B,
E1301B, E1302A or
E1401B, E1421A
(requires E1405A/B)
F,O,
P,T
Digital Multimeter
2-Wire Ohms (up to 10 k
Ω
)
DC Volts (to 0.01 mV)
Agilent 3458A or
Agilent 34401A
O,P,T
Power Supply
+10 Vdc
±
0.1 V
Agilent 6214C P, T
Resistor
100 k
Ω ±
1%
Agilent PN 0757-0465 P, T
*
F = Functional Verification Tests, O = Operation Verification Tests, P = Performance Verification Tests, T = Troubleshooting
Inspection/
Shipping
This section contains initial (incoming) inspection and shipping guidelines
for the FET Multiplexer.
Initial
Inspection
Use the steps in Figure 1-2 as guidelines to perform initial inspection of a
FET Multiplexer. Performance Verification tests are optional.
WARNING
To avoid possible hazardous electrical shock, do not perform
electrical tests if there are signs of shipping damage to the
shipping container or to the instrument.
1-6 General Information