Agilent Technologies 70341A, Руководство по установке, Страница: 71 / 92

Reference
Specications- HP 70340A/41A
Rear P anel Connectors
HP 70340A
0.5-1 GHz OUTPUT:
SMA connector outputs a 0.5 to 1.0 GHz signal for driving the HP 70341A
Frequency Extension module . The HP 70341A combined with the HP 70340A
extends the Signal Generator RF Output frequency range down to 0.01 GHz.
0.01-1 GHz INPUT:
SMA connecotr accepts the HP 70341A 0.01-1 GHz output signal. The HP
70341A signal is output step attenuated in the HP 70340A with the 0.01 to
1.0 GHz output available at the front panel RF Output connector of the HP
70340A.
10 MHz INPUT:
SMB connector accepts a 10 MHz 6 100 Hz, 0 to +10 dBm, external reference
signal for operation from an external high stability timebase . Nominal input
impedance is 50.
10 MHz OUTPUT:
SMB connector outputs the 10 MHz external reference signal, nominally
+3 dBm, for use as an external reference signal.
EXTERNAL ALC OUTPUT:
SMB connector outputs external ALC drive signal (from the front panel EXT
ALC input connector) to the frequency extension module .
ALC CONTROL OUTPUT:
SMB connector supplies a 010 to +10 V signal as a reference for leveling the
.01 to 1.0 GHz output signal of the HP 70341A.
0.5V/GHz OUTPUT:
SMB connector supplies a voltage proportional to output frequency for use
with mm-wave frequency multipliers , including the HP 835XX Series .
AM OUTPUT:
SMB connector outputs AM drive signals (from the front panel EXT PULSE
input connector) to the frequency extension module .
PULSE OUTPUT:
2 SMB connectors output pulse modulation drive signals (from the front panel
EXT PULSE input connector) to the frequency extension modules .
3-26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com