Agilent Technologies 11982A, Руководство по эксплуатации и обслуживанию

Страница: 61 / 70

4-16
Verification and Service Information
Service Information
Replaceable Parts
This section contains information for identifying and ordering replacement
assemblies and mechanical parts for the Agilent 11982A lightwave converter.
Replaceable Parts
Table Format Table 4-6 on page 4-19 lists information for each major assembly and for each
major mechanical and electrical part that is not part of a major assembly.
Table 4-7 on page 4-21 lists information for the Agilent 11982A replaceable
hardware. The following information is listed in Table 4-6 and Table 4-7 :
1 Item number of callout in Figure 4-4 on page 4-18 , Figure 4-5 on page 4-20 , or
Figure 4-6 on page 4-20 .
2 Agilent Technologies part number.
3 Part number check digit (CD).
4 Description of the assembly.
Part Ordering Information
To order an assembly or mechanical part listed in this chapter, quote the Agi-
lent Technologies part number and the check digit, and indicate the quantity
required. The check digit is used to verify the correct part number. The check
digit will ensure accurate processing of your order.
To order a part that is not listed, include the following information with the
order:
• Lightwave converter model number.
• Lightwave converter serial number.
• Description of where the part is located, what it looks like, and its function (if
known).
• Quantity needed.
Parts can be ordered by addressing the order to the nearest Agilent Technolo-
gies office. Customers within the USA can also use either the direct mail-order
system or the direct phone-order system described below. The direct phone-
order system has a toll-free phone number available.